Discussion on Maintenance Knowledge of FRP Cooling Tower
FRP cooling towers in the industrial application of more and more widely, many companies will choose to use the operation of glass fiber reinforced plastic cooling towers. FRP cooling tower maintenance is relatively simple to use the efficiency is also very high, but also do routine maintenance measures and noise reduction measures. FRP cooling tower maintenance costs are relatively low because of their own three reasons.
1, FRP cooling tower itself has a certain anti-rust ability, the latter do not have to invest in this area.
2, FRP cooling tower anti-fouling performance is good, do not often do clean.
3, FRP cooling tower antifreeze, wear, corrosion resistance, long service life.
100m3 panels combined SMC/GRP/FRP water storage tank food grade
There are two common ways to reduce the cooling tower noise: First, install the facilities that are commonly referred to as wearing a cape, but the consumption of resources, increased wind resistance; the other is from the sound source to start. We take the noise reduction measures from the sound source, the use of large chord length, the outer diameter of the wide, narrow diameter and forward tilt was formed by the combination of the blade of the axial fan.
1.22mm*1.22mm galvanized water tank panel
The distribution of the increase in the height of the leaves is shifted from the direction of the leaf, and the use of the small leaves in the upper half of the leaves of the characteristics of small loss, and significantly reduced near the root of the large angle of attack angle to improve the stall phenomenon, Improve the aerodynamic performance, when the speed is low, can get a higher wind pressure, and also expanded the stable working range.
For more information, please visit our website: www.grp-watertank.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204, you can also call our boss straightly: 008615930159213
评论
发表评论