Water tank control method

Hot dip galvanized steel water tank
Category: water tank
1, the easiest way is to install a float in the stainless steel tank where there is a float, when your water level to reach the control line, the float will automatically plug the water pipe, as well as water can not be injected from the inlet, this principle is quite The toilet at home. The drawback of this method is that the float is easier and bad, and there may be a large water leakage accident due to a float problem.
1.22mm*1.22mm galvanized water tank panel
2, the second method is to install an electronic water level switch (controller).
Through the built-in electronic probe to detect the water level, and then by the chip to detect the signal processing, when the judge to the water, the chip output high level 24V or 5V, when judged to no water, the chip output 0V. High and low level of the signal through the PLC or other control circuit to read, and drive pumps and other electrical work. Products can be installed in any direction, when the horizontal installation, the water level to reach the blue line on the action, and high precision. Vertical installation of the product, the water level to reach the red line on the action, there is a certain anti-wave function. It is quite safe and precise.
1m*1m FRP/GRP Panel for SMC water tank
For more information, please visit our website: www.grp-watertank.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204, you can also call our boss straightly: 008615930159213