The Requirement of Steam Heating to Stainless Steel Tank Quality

 Steam heating on the quality of stainless steel tank requirements: at least to meet the national standard Atlas standards, according to the actual size of the actual stainless steel tank. Steam directly into the water will make a lot of cold water in the residual chlorine release, the welding port and the surface contact with the edge of the stainless steel corrosion serious. At present, the market is mostly stamping stainless steel plate welding. After the stamping of the stainless steel surface easy to have fine cracks. Thickness to meet the national standard or a little more can make the life of stainless steel tank longer. Another: the enterprise does not recommend the steam directly into the water heating method (there are many shortcomings). It is recommended to do coil heating in the tank.
    The Requirement of Steam Heating to Stainless Steel Tank Quality
More than just the surface, specifically that is: material to see the label, and the process does not matter, the specific performance parameters to check the standard. Hot-rolled plate toughness and poor surface roughness, generally used for impact load cold-rolled sheet of good stretch, toughness, generally less than 4mm sheet. Hot rolling and cold rolling are all steel or steel plate forming process, they have a great impact on the organization and performance of steel, steel rolling mainly hot rolling mainly cold rolled only for the production of small steel and thin plate.
The main difference between cold rolling and hot rolling:
1, cold-rolled steel to allow partial buckling of the cross-section, which can take full advantage of the buckling of the bearing capacity; and hot-rolled steel does not allow partial buckling of the section.
2, hot-rolled steel and cold-rolled steel residual stress for different reasons, so the distribution of the cross-section is also very different. The residual stress distribution on the cross section of the cold-formed thin-walled section is curved, and the residual stress distribution on the section of the hot-rolled steel or welded steel is thin film.
3, hot-rolled steel free torsional stiffness than cold-rolled steel, so hot-rolled steel torsional performance is better than cold-rolled steel. Stainless steel water tanks are made of stainless steel cold rolled stainless steel.
The first step of the first clean-up operations (basic business operations)
1, the use of syrup, white cloth on the assembly of stainless steel tank on the body and equipment (manhole, escalator, ventilation pipe, access to water pipes, etc.) for treatment;
2, remove the sediment: remove the top of the box, the bottom of the corrosion and sediment and waste water;
3, remove the attached material: stainless steel tank for the first time did not completely clean up the attachments, rust, etc. for a comprehensive clean up;
The second step followed by cleaning operations
1, with high pressure faucet again full cleaning;
2, residual water treatment: After cleaning the residual water treatment, clean water tank inside.
For more information, please visit our website: www.grp-watertank.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204