Stainless steel water tank and stainless steel insulation tank

Hot dip galvanized steel water tank
Stainless steel insulation tank refers to the stainless steel water tank as the inner layer, and then in the stainless steel tank to do outside the insulation layer, usually with insulation material as the core layer, in the insulation material and then covered with an ordinary stainless steel sheet or color plate.
100m3 panels combined SMC/GRP/FRP water storage tank food grade
 Stainless steel tank is not all need to do insulation treatment, like the general installation in the south, indoor and stainless steel tank insulation is no need to place the place is not necessary to heat treatment. The main purpose of insulation has two roles: First, to avoid the water temperature drop in the tank, as is generally used in the bath of the water tank is such a role, the other role is: to prevent the temperature is too low, leaving the water tank rupture.
1.22mm*1.22mm galvanized water tank panel
Especially in the northeastern part of China, the temperature in winter to reach zero degrees tens of degrees, if the tank is installed in the outdoors, it is prone to deformation or cracking and leakage occurred, so it must do insulation treatment. Here I will briefly introduce the commonly used insulation materials: core material: polyurethane, polystyrene, polypropylene, rock wool, rubber outer material: stainless steel plate, galvanized sheet, aluminum and color steel plate stainless steel tank insulation effect the thickness of the insulation layer depends on the thickness and insulation effect, the thicker the insulation layer, the wider the coverage, the better the insulation effect, and now the water tank market, some manufacturers in order to save costs In addition to the water tank material cut corners, Even under the insulation layer above the article, the thickness of the insulation layer is only 20 - 30mm, and the water tank at both ends without insulation layer, this effect will naturally not ideal, as we use the thickness of the insulation layer are 40 -50mm, so that the water tank 360 degrees all-round insulation.
Hot-dipped Galvanzied Sectional Water Storage Tanks for Water Treatment
As for the insulation material polyurethane is the best, the worst is the rubber, generally for our country, the use of thermal insulation rock wool color plate can meet the requirements.
For more information, please visit our website: www.grp-watertank.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204, you can also call our boss straightly: 008615930159213