Stainless steel water tank air electric heater
Core Tip: Air heater installed in the stainless steel tank factory water tank heat pump unit to send, return air duct or directly installed in the unit. When the water temperature in the loop is not lower than 13 ℃, the unit according to the heat pump conditions
Air heater installed in the stainless steel tank factory water tank heat pump unit to send, return air duct or directly installed in the unit. When the water temperature in the loop is not lower than 13 ° C,
The unit is operated according to the heat pump condition. When the circulating water temperature is equal to or lower than 13 ℃, the refrigeration compressor is closed, the unit stops the heat pump operation, and the air electric heater is put into operation,
hot dip galvanizing steel water tank
Heating the room air. Through the indoor temperature sensor to control the amount of heating to adjust the indoor temperature. When the loop water temperature rose to 21 ℃, stop the electric heater, restore the unit press
Heat pump operation. Its advantages are mainly the following points.
(1) low initial investment.
(2) electric heater easy to measure, easy to single-user billing.
(3) save the building area, save the water heating equipment room.
(4) the use of non-centralized heater, and improve the reliability of the use of the tank system.
At the same time, can also be used as a standby or emergency heat source.
Panel Type Water Tank / Sectional GRP Panel Tank
However, the system at this time is actually an electric heating system, this system is very unreasonable way to use, in the actual project should not be used
For more information, please visit our website: www.grp-watertank.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204, you can also call our boss straightly: 008615930159213
评论
发表评论