Stainless steel tank handling method

1. The necessary treatment of the stainless steel tank is pickling, so that the surface can be smooth treatment. First in the operation of the steps, it is better to prepare to work, to ensure that when the operation will be foolproof.
2. The use of chemical reactions to degrease the way, in doing the work of degreasing, we must ensure that a good time, not too short, can not be too long. Stainless steel tank in the soaking time, we must be optimistic about the location, if there is air into the case, there will be a little trouble. Also, pay attention to the soaking process, to be followed by a sequential shaking, so that its effect will be more good.
3. The third step is necessary to rinse, and use hot water to rinse. Its temperature should be controlled within a certain range. Rinse immediately after the rinse with water, rinse the water is also a certain requirement.
4. Then there is a stainless steel tank passivation, the passivation time is also required, in order to improve the effect, we must use water to rinse. The last step is to dry the tube and work with the inspection. Be sure to let the professional technical staff to test, so will be foolproof, after passing the inspection, you can carry out the packaging.
For more information, please visit our website: www.grp-watertank.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204