Stainless steel tank cleaning six point safety precautions
Core tips: stainless steel tank cleaning safety precautions: the use of safe voltage line lamp, wire insulation is good, and install the leakage switch. Upper and lower stainless steel tanks should wear non-slip shoes, transfer tools and other items to apply the rope. Do not enter the pool before entering the stainless steel tank without oxygen.
Stainless steel tank cleaning safety precautions
1 Use safety voltage line lamp, wire insulation is good, and install leakage switch.
2, the upper and lower stainless steel tank should wear non-slip shoes, transfer tools and other items of application rope.
3 No test stainless steel water tank before there is no oxygen, not into the pool.
4 disinfectants must wear protective glasses and masks.
5 disinfectant preparation method
6 disinfectant preparation method (stability of chlorine dioxide preparation) to disinfect the 1.0 ton water tank as an example need to prepare 3kg concentration of 200PPM disinfectant; method: container container disinfectant solution 80m1, plus activator 8 grams, shaking or Stirring to dissolve, 5 minutes after the light yellow can be added 8kg diluted in water. Use the diluted disinfectant to spray on the inner wall of the tank to make it moist. 6 minutes after spraying can be used to fill water.
For more information, please visit our website: www.grp-watertank.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204
Stainless steel tank cleaning safety precautions
1 Use safety voltage line lamp, wire insulation is good, and install leakage switch.
2, the upper and lower stainless steel tank should wear non-slip shoes, transfer tools and other items of application rope.
3 No test stainless steel water tank before there is no oxygen, not into the pool.
4 disinfectants must wear protective glasses and masks.
5 disinfectant preparation method
6 disinfectant preparation method (stability of chlorine dioxide preparation) to disinfect the 1.0 ton water tank as an example need to prepare 3kg concentration of 200PPM disinfectant; method: container container disinfectant solution 80m1, plus activator 8 grams, shaking or Stirring to dissolve, 5 minutes after the light yellow can be added 8kg diluted in water. Use the diluted disinfectant to spray on the inner wall of the tank to make it moist. 6 minutes after spraying can be used to fill water.
For more information, please visit our website: www.grp-watertank.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204

评论
发表评论