Insulation time of stainless steel insulation tank and installation point of attention

Stainless steel water tank in the stainless steel insulation tank, which is a commonly used water tank, but also in the property, either a stainless steel tank, but also can be insulated water tank. However, are in the water tank of this large category. So, in front of the stainless steel tank to explain, the following, we come to understand the stainless steel insulation tank, so that we can in the water tank, know their different types, so as to broaden their knowledge.
1. How is the stainless steel insulated tank formed? Its composition, which is mainly what?
These two questions, for the stainless steel tank manufacturer Chase, is easy to answer, so its specific answer is:
Stainless steel insulation tank, which is through the inner and outer layers of stainless steel and the core layer between the optimal combination, thus forming a water tank. This kind of water tank, in the composition, mainly have:
Core layer: polyurethane foam, polystyrene, polypropylene foam, rock wool and PEF and so on.
Inner: food grade stainless steel plate, galvanized sheet, color plate or aluminum plate.
Outer layer: stainless steel plate, galvanized sheet, aluminum plate or color plate.
2. stainless steel insulation tank, the insulation time limit for how much? Whether the thicker insulation layer, the longer the longer insulation time?
Stainless steel insulation tank insulation time limit, in the stainless steel tank manufacturers Chase view, its provisions are:
At room temperature within 24 hours, the use of polyurethane foam material, the cooling rate of 4 degrees or less. If it is other insulation materials, the cooling rate should be within 10 degrees. This is considered qualified.
In addition, the greater the thickness of the insulation material, the longer the continuous holding time. So, for question two, the answer is yes.
3. Installation of stainless steel insulation tank, what are the points?
Stainless steel water tank, its installation precautions, stainless steel tank manufacturer Chase believes that the following are the following, is:
The tank in the installation, the box and the wall between the distance should be left not less than 800mm of the maintenance channel. Also, at the top of the box and the bottom of the box, not less than 500mm. After the installation of the tank is completed, a leak test should be carried out to check the water tank for leaks and whether the sealing performance is good.
For more information, please visit our website: www.grp-watertank.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204