Four-point welding of stainless steel water tank
Stainless steel square life water tank
First, the first control of the welding current, stainless steel water tank in the welding time, the current must be less than low-carbon steel, the current is about 80% of low carbon steel;
1m*1m FRP/GRP Panel for SMC water tank
Second, the second is the effective control of the speed of welding, as far as possible the fastest speed to the stainless steel tank for welding, the main purpose is to reduce the width of the entire heat affected area, the weld temperature of the sensitized zone to stay To the minimum, so that the weld is always maintained in a stable state, and the weld tissue refinement;
Enameled water tank
Third, once again a reasonable choice of welding materials, stainless steel tank for welding material selection must be appropriate, but also to protect the atmosphere, because the main chemical composition of the wire will weld the entire site, causing corrosion resistance Related to the impact, and the electrode is best with the parent metal and the same chemical composition, so as to ensure the effectiveness of the weld;
BDF water storage tank underground tank
Fourth, the last is the stainless steel tank after welding the cleaning work, the surface of the material must be left because of the residue left to clean up, after the end of the welding should be to remove the clean residue.
For more information, please visit our website: www.grp-watertank.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204, you can also call our boss straightly: 008615930159213
评论
发表评论