Detailed description of the three stainless steel water tank production process

High pressed galvanized drinking water storage tank
Stainless steel cylinder fire tank
First, if the stainless steel tank is used in the cold-rolled molding, it is allowed to buckle in the partial cross-section, mainly in order to be able to better and fully use the buckle after the need for bearing capacity, but if it is hot-rolled steel, then Absolutely does not allow any partial buckling in the section.
1.22mm*1.22mm galvanized water tank panel
Second, because the stainless steel water tank with hot-rolled steel and cold-rolled steel, the residual stress caused by the reasons will be different, so the cross-section appears and distribution will have a relatively large difference, if it is cold-formed thin-walled steel , The stress on the entire section of the distribution in the distribution, the main presentation of the curved type, and hot-rolled steel or welded steel, then the entire section in the residual stress, the main presentation of the thin-walled type.
Hot-dipped Galvanzied Sectional Water Storage Tanks for Water Treatment
Third, and hot-rolled steel in the free torsional stiffness, than the cold-rolled steel is much higher, so the hot-rolled steel in the torsional performance than the cold-rolled steel is much better, but the stainless steel tank will choose the basic The use of stainless steel sheet, and stainless steel plate are basically the use of cold-rolled stainless steel.
Panel Type Water Tank / Sectional GRP Panel Tank
For more information, please visit our website: www.grp-watertank.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204, you can also call our boss straightly: 008615930159213

评论

此博客中的热门博文

Classification of stainless steel tanks and how to color

How to maintain to extend the life of the stainless steel tank

Characteristics of Water Ring Heat Pump Stainless Steel Water Tank System.