Description of the tank
Drinking water storage tank
Category: water tank
Applicable scope
For civil and general industrial building water supply systems, such as living water supply, fire water supply, pipeline drinking water, water and other systems to adjust the water storage equipment.
BDF water storage tank underground tank
Technical conditions
1. Water tank material: can use anti-corrosion treatment of carbon steel plate, stainless steel plate, enamel steel plate. Glass plate, hot-dip galvanized steel plate, carbon steel plate lined with stainless steel plate, etc., should be based on storage water quality, use selected.
2. Water tank capacity: the water tank should be between the level of the effective selection of the volume, can not be selected according to the nominal volume of the tank.
1.22mm*1.22mm galvanized water tank panel
3. Water tank accessories: water tank should be equipped with water inlet pipe, outlet pipe, overflow pipe, ventilation pipe water level signal device or interface, population, inside and outside ladder and so on.
(1) The diameter of the inlet pipe is calculated according to the flow rate of 0.8-1.2 m per second. When the inlet diameter is greater than 150mm, should be designed into two or more inlet pipe, inlet pipe and float valve installation height to meet the water pollution requirements.
(2) outlet pipe diameter by water pump or water supply system design seconds to determine the flow.
100m3 panels combined SMC/GRP/FRP water storage tank food grade
(3) overflow pipe is generally larger than the inlet pipe 1, the overflow pipe from the inlet height should meet the anti-pollution requirements. The overflow pipe must not be directly connected to the drainage system, need to have air partition.
(4) The diameter of the discharge pipe according to the size of the tank to determine the general shall not be less than 50mm, should be located in the lowest water tank, not directly connected with the sewage pipe.
hot dip galvanizing steel water tank
(5) Vent holes should not be less than 50MM, large water tank with two ventilation pipes.
(6) water level signal glass tube level gauge, the tank should be reserved for control, the signal tube to take over the nozzle.
For more information, please visit our website: www.grp-watertank.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204, you can also call our boss straightly: 008615930159213
Category: water tank
Applicable scope
For civil and general industrial building water supply systems, such as living water supply, fire water supply, pipeline drinking water, water and other systems to adjust the water storage equipment.
BDF water storage tank underground tank
Technical conditions
1. Water tank material: can use anti-corrosion treatment of carbon steel plate, stainless steel plate, enamel steel plate. Glass plate, hot-dip galvanized steel plate, carbon steel plate lined with stainless steel plate, etc., should be based on storage water quality, use selected.
2. Water tank capacity: the water tank should be between the level of the effective selection of the volume, can not be selected according to the nominal volume of the tank.
1.22mm*1.22mm galvanized water tank panel
3. Water tank accessories: water tank should be equipped with water inlet pipe, outlet pipe, overflow pipe, ventilation pipe water level signal device or interface, population, inside and outside ladder and so on.
(1) The diameter of the inlet pipe is calculated according to the flow rate of 0.8-1.2 m per second. When the inlet diameter is greater than 150mm, should be designed into two or more inlet pipe, inlet pipe and float valve installation height to meet the water pollution requirements.
(2) outlet pipe diameter by water pump or water supply system design seconds to determine the flow.
100m3 panels combined SMC/GRP/FRP water storage tank food grade
(3) overflow pipe is generally larger than the inlet pipe 1, the overflow pipe from the inlet height should meet the anti-pollution requirements. The overflow pipe must not be directly connected to the drainage system, need to have air partition.
(4) The diameter of the discharge pipe according to the size of the tank to determine the general shall not be less than 50mm, should be located in the lowest water tank, not directly connected with the sewage pipe.
hot dip galvanizing steel water tank
(5) Vent holes should not be less than 50MM, large water tank with two ventilation pipes.
(6) water level signal glass tube level gauge, the tank should be reserved for control, the signal tube to take over the nozzle.
For more information, please visit our website: www.grp-watertank.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204, you can also call our boss straightly: 008615930159213
评论
发表评论