Causes of Water Leakage of Fiberglass Water Tank and Maintenance

Hot dip galvanized steel water tank
Causes of Water Leakage of Fiberglass Water Tank and Maintenance
Features of New Glass Assembly Glass Fiber Reinforced Water Tank
- Excellent selection: resin and glass fiber are used well-known domestic brands to ensure product quality.
Second, the unique structure: with a special seal, the whole bolt connection structure, easy assembly, there will be no leakage and sealing lax phenomenon.
Third, the construction of fast: standard molded plate; free assembly, no lifting equipment.
Fourth, the box beautiful: white appearance of color, giving a more comfortable feeling.
Five, light weight: SMC molded water tank is 1: 0.1-0.2, so in the design process without considering their own weight, so called the portable water tank.
Sixth, environmental protection: do not breed algae and red worms, to avoid secondary water pollution, to keep water clean.
High pressed galvanized drinking water storage tank
7, to reduce the cleaning: cleaning once every six months can greatly reduce the cleaning costs
The reason for the leakage of the assembled FRP tank is as follows:
(1) insufficient resin content;
(2) the elongation rate of the resin collective is low;
(3) anti-corrosion seepage lining lining design is not appropriate;
(4) process factors.
Preventing FRP water tank leakage from the design and process can start two aspects.
(1) design:
① design should be based on storage media, a reasonable choice of resin varieties.
② reasonable design tank lining thickness, should be greater than 2mm. The reinforcing material of the lining layer is a surface felt and a chopped felt, the resin content in the surface felt is 90%, and the resin content of the chopped glass fiber felt layer should be greater than 70%.
Panel Type Water Tank / Sectional GRP Panel Tank
③ the resin toughening treatment, so that the elongation is equal to or greater than the elongation of glass fiber.
④ in the resin to add the right amount of coupling agent, glass fiber and resin interface on the increase in the density of coupling agent. (2) Process:
① manufacturing lining layer, be sure to wait for the surface of the resin after the gel layer of the shop in the shop chopped fiberglass felt layer: the same to short-cut the resin layer within the rubber layer and then shop layer, so as to ensure that the lining Of the resin content.
② production process, we must ensure that the layer between the dense layer, and as far as possible to eliminate bubbles and cracks.
③ strict with plastic management, the general should be special with plastic, with a contest can not be too large to ensure uniform supply.
④ bonding patchwork to be strict, careful.
⑤ metal embedded parts should be galvanized. In the process of transfer process, to prevent secondary pollution.
⑥ improve the operational responsibility of workers, strict implementation of the rules.
Fire water storage tanks
Assembly of glass fiber reinforced plastic tank water leakage maintenance program
FRP water tank conventional water leakage point analysis and maintenance program: sheet quality problems or sheet of sandy eyes leak. The solution is as follows:
1, if the plate cracks leaking, the seam is very small, you can use sealant or water does not leak inside the tank repair, the method is; to put the water finished, dried, sealant or water does not leak to the leaky parts can.
2, if it is a large plate cracks, indicating the quality of the plate problems, which is looking for manufacturers to replace or return.
3, if the sheet and the sheet at the seams at the water leakage, indicating that the middle of the tape is not clamped or no bolt tightening, repair method is tight about the bolt (tight one).
4, if the four horns and plugging at the water, that the tape did not put away or plugging the direction of dislocation, repair method is to plug out, and then put some strips, re-installed on it.
hot dip galvanizing steel water tank
5, if it is winter, you have to look at the glass steel tank will not be frozen due to freezing and water leakage. In general, a small injury can be wiped with glass, big problems will change plate, or even change the new water tank.
For more information, please visit our website: www.grp-watertank.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204, you can also call our boss straightly: 008615930159213